[Nick07]

I'm just kind of curious if there's other free or relatively cheap mods that will help out performance any. Besides what I have, which is a DHP pcm, intake (workin on FWI), exhaust, synthetic fluids, spark plugs, wires, and I think that's it. I'm also planning on a shift kit in the near future as well and I don't have access to a tuner so that's out of the question (for now). Things that are say less than $100 or free, I'm sure it's a small list but there's gotta be somethin. Such as putting in different injectors (DigitallyPheonix put in L67's), which I would imagine the fuel pressure would have to be changed or the fuel pump

This post has been edited by Cully77: 08 February 2010 - 12:08 AM

[bumpin96monte]

No reason to change injectors unless you're coming close to maxing out your current ones- same with the fuel pump and such.

[Nick07]

Alright, just examples cuz I can't really think of anything else. BTW the title should say Additional Mods

[nitehawkjcb]

Honestly, your options are few. I doubt any company makes performance parts for that motor. A good mod would be porting your throttle body. Then you'd probably need to tune the car though.

[Nick07]

I know there is almost no support for this motor as far as performance goes. Just hoping to gather some things I may have missed cuz some guys have little tricks they do that not many know about

[RedZMonte]

looks like you have a 1996 Z34? honestly there is just not much to do to these motors without doing alot of custom work. any suspention work?

Cheap easy mods:
Port intake manifolds (gasket match to head), smooth out the runners a little for better flow
Port stock exhaust manifolds
larger T/B? might need an adaptor (northstar or something along thoes lines)
Lowering Springs
Strut tower bars
SS braided brake lines
Slotted Brake rotors & Better pads
Poly bushings
FFP Under Drive pulley (if you can find one used)
FFP Polly/Billet Dog bone (if you can find one used)


S

[Nick07]

RedZMonte, on 10 February 2010 - 06:12 PM, said:

looks like you have a 1996 Z34? honestly there is just not much to do to these motors without doing alot of custom work. any suspention work?

Cheap easy mods:
Port intake manifolds (gasket match to head), smooth out the runners a little for better flow
Port stock exhaust manifolds
larger T/B? might need an adaptor (northstar or something along thoes lines)
Lowering Springs
Strut tower bars
SS braided brake lines
Slotted Brake rotors & Better pads
Poly bushings
FFP Under Drive pulley (if you can find one used)
FFP Polly/Billet Dog bone (if you can find one used)


S

Pretty much everything there is on my list plus more, I mean just like performance mods to make me go faster