Hello everyone. I have to replace the lower intake gasket on my soon to be newly aquired 02 monte carlo and was wondering if it was worth tossing in pp'd uim, lim and a 65mm tb from mms as well as a intake kit? I have no other mods done to the car (not even exhaust-would be to loud for my kids). Also would i have to reprogram the pcm or will it adjust itself?
Thanks any and all for your help.
Page 1 of 1
02 Monte Carlo3400 (La1) Mms Uim,lim,65Mm Tb.
#2
Posted 11 January 2012 - 01:11 AM
It would probably adjust itself, but if you're going to take off the LIM, you might as well take off the heads and have them ported too.

'96 Monte L67 - Ported heads | Full 3" Exhaust | Ported TB | 180* T-stat | 104's | HAI | UDAP | SSPlog&Ported Rear | P&P Gen III | Walbro | AFC |
'93 Prelude H22A1 - Header | CAI | 2.5" SS Exhaust |
http://usatyourservice.webs.com | http://www.expertpcnc.com
#3
Posted 18 February 2012 - 06:38 PM
i did all that with ported head with ls6 springs...it ran ok...with no problems on a stock tune but when i got it tuned it was soo much better...this was on my 03 ls
"i really just didnt like having a gaping hole"
Share this topic:
Page 1 of 1

Help













